Muratec MFX-1300/1700 Operating Instructions Manual page 86

6 Press .
ENTER
If you ve entered an incorrect .
I
returns to standby mode.
If you ve entered the correct .
I D
03:Erase F-Code Box
Check Enter/Cancel
Note: If you want to quit without erasing the F-Code box you ve selected, press
. The fax will return to step 2.
CANCEL
Note: If you want to quit without erasing any F-Code box, press
The machine returns to standby mode.
7 Press to erase the F-Code box.
ENTER
Erase F-Code Box
** Complete
To erase another F-Code box, repeat steps 2-7.
To finish, press .
STO P
F-Code transmission and polling
W ith F-Code, your machine can send secure transmissions, perform relay broadcast ini-
tiations and even poll from other -
ITU T
You can do this two ways:
Using the programmable one-touch key (see pages 3.40 3.43)
Entering the - sub-address and password directly, which is what we ll describe
ITU T
here.
Note: For F-Code communication to work, three things must be true:
The remote fax machine must support
The remote fax must have a mailbox with an
You must know the - sub-address and password (if any) for the remote
ITU T
machine s mailbox
F-Code transmission
1 Insert the document.
2 Adjust the resolution and contrast if necessary.
3 If you want to toggle between real time transmission and memory transmission,
press .
M E M O RY TRANSMIT
. code, your fax machine rejects the attempt and
D
. code, the display shows:
STO P
**
-equipped machines, regardless of manufacturer.
- sub-addressing
ITU T
- sub-address created on it
ITU T
4 Press
A D VA N C E D FUNCTIONS
Enter Sub-Address
_
5 Use the numeric keypad to enter the appropriate sub-address in the remote
machine. In this example, we ve entered 123456.
Enter Sub-Address
123456_
.
Note: If you make a mistake, press
the correct number.
6 Press
ENTER
Enter Password
_
Note: If this sub-address does not have a password, skip to step 8.
7 Use the numeric keypad to enter the password. In this example, we ve entered
654321.
Enter Password
654321_
8 Press
ENTER
Enter Fax Number
_
9 Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialing from the numeric keypad. Do not press
10 What you do now depends on when you want the transmission to begin.
To have it begin now, skip to step 13.
To delay it, go on to step 11 .
11 Press
A D VA N C E D FUNCTIONS
Delayed
Enter Time: 15/17:05
12 Use the numeric keypad to enter the day and time when the transmission should
begin, then press
13 Press
STA R T
three times and then press
to erase the character, then enter
CANCEL
. The shows:
LCD
. The shows:
LCD
, . The shows:
ENTER LCD
.
ENTER
.
Advanced features
.
ENTER
.
STA R T
3.33