Muratec MFX-1300/1700 Operating Instructions Manual page 97

Advanced features
Programming a batch transmission
For this operation to work, two things must be true:
The batch box you re using must exist on your fax machine.
You must know the batch box s identifier number (1 5).
To program a batch transmission into a programmable one-touch key:
1 Press Program key, , 3 , 0 , 1 ,
A
ble one-touch number available:
Select Program No.
P2:No Number Stored
Note: I f P2 appears on the
b e r f o r P1. You can see what you programmed into P1 by pressing
you want. For example, if you set P1 for storing of the polling document,
you will see:
Select Program No.
P1:Polling Document
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2 Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for a batch transmission and
you want to keep this key programmed for a batch transmission, use
these instructions to make changes. But if you want to assign this key to
a completely different operation (for a delayed transmission, for exam-
ple), then you first must erase the stored command before programming
the new one.
3 If you want to select a different programmable one-touch key than the one that
appears on the , press that key now.
LCD
4
Press .The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
3.44
.The shows the first empty programma-
ENTER LCD
, it means that you have already entered a num-
LCD
5 Press u n t i l Communication appears.
Type :Communication
6 Press ,
ENTER A D VANCED FUNCTIONS
Batch Tx
Enter Box No.
7 Use the numeric keypad to enter the one-digit identifier for the batch box you
want to assign to this one-touch key. Here, we ve entered 5:
Batch Tx
, i f
Enter Box No.
Note: To change an identifier already entered, press
re-enter the correct identifier.
8 Press . The
ENTER LCD
grammable one-touch number.
Option
I f y o u do not want to make additional settings, press
I f y o u do want to make additional settings, press
9 The asks which resolution you want to use for this programmable one-touch
LCD
number.
Resolution
10
Press until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to spec-
ify the displayed setting for this programmable one-touch key.
11 Press . The
ENTER LCD
one-touch number.
Contrast
12 Press until the mode you want appears.
/ /Enter
five times and then press
ENTER
:_
:5
CANCEL
asks if you want to make additional settings for this pro-
:Off
/ /Enter
.Skip to step 16.
ENTER
and
ENTER
:-----
/ /Enter
asks you to select a contrast mode for each programmable
:-------
/ /Enter
.The shows:
LCD
t o e r a s e i t . Then
.