Delayed Transmission; Setting Up A Delayed Transmission - Muratec MFX-1300/1700 Operating Instructions Manual

Advanced features

Delayed transmission

Take advantage of lower evening and weekend long-distance rates with delayed trans-
mission. Your fax machine can store up to 99 delayed commands, each of which you
can program up to 31 days in advance.
Important: If you program all 99 delayed transmission commands, no further m e m-
ory transmission is possible until one or more of the commands is
completed. ( To review Memory transmission, see page 2.3.) However, i f
all 99 delayed commands are programmed, you can always transmit with
the Real time transmission from

Setting up a delayed transmission

Important: Your machine only remembers the day of the month that it s supposed to
send a delayed transmission. It does not remember the month its e l f . S o i f
you want to send a transmission at 5:05
transmission sooner than 5:06
To set up a delayed transmission:
1 Insert the document and make any necessary adjustments .
2 Press
A D VA N C E D FUNCTIONS
1.Delayed
/ /Enter
3 Press . The shows the current day of the month, followed by the current
ENTER LCD
time (in 24-hour format):
Delayed
Enter Time: 06/17:16
4 Use the numeric keypad to enter the day of the month and the time when you
want the fax to send the delayed transmission.
Note: Press to move the cursor left , o r
Here, we ve set the transmission to occur on the 11th at 11:05
Delayed
Enter Time: 11/23:05
3.10
(see page 2.3).
ADF
on June 26, don t program the
P M
on May 26.
P M
.The shows:
LCD
to move it right.
P M
5 When the date and time are entered, press
s i o n . The
Enter Fax Number
_
6
Enter the fax number for the delayed transmission document. You can either
press a one-touch key, enter a speed-dial number or use the numeric keypad to
enter the fax number.
7 Press
:
LCD
Jun 06 2002
This means your fax machine is reserved for the delayed transmission you just
programmed.
If you set the machine for memory transmission, it will scan the document into
memory, a fter which you can use the machine normally.
If you set the machine for non-memory transmission (real time transmission),
the machine can receive faxes but can t transmit until your delayed command
has been performed.
Important:
:
shows:
LCD
.Your machine returns to standby mode, while showing this on the
STA R T
** Reserved **
17:17
If you specified the delayed non-memory transmission (real time
transmission), do not remove the document in
ment is removed from before a delayed command completes,
ADF
it cancels the delayed real time transmission.
to save the delayed transmis-
ENTER
. If the docu-
ADF