Printing A Delayed Command List; Printing A Stored Document - Muratec MFX-1300/1700 Operating Instructions Manual

Basic operation
3 If you want to cancel the command shown, press
C01:9-5552311
Check / / /Cancel
4 To go ahead with canceling the command, press
to view other delayed commands.
To keep this command but to continue reviewing stored commands, press
.Go back to step 2.
To keep this command and stop reviewing commands, press
machine to standby mode.
Note: See also Reviewing or canceling pa r ts of a broadcast, below.
Reviewing or canceling pa r ts of a broadcast
You also can review or cancel certain numbers within a broadcast:
1 Press . /
C O M M CANCEL CONFIRM
2 Press o r to scroll through currently stored broadcast command.
Note: Stop this operation at any time by pressing
C01:Broadcast
/ / /Cancel
3 If you want to cancel the command shown, press
If you want to review individual numbers within this broadcast, go on to
step 4 without pressing
CANCEL
4 To review individual numbers within this broadcast, press
see the first number. The
LCD
9-5550388
/ / /Cancel
5 Press o r until you find the number you want to cancel.
6 Press , .The next number will appear.
CANCEL CANCEL
If you want to cancel this number, also, repeat this step.
If you want to cancel a different number, go back to step 5.
If you want to go back to reviewing or canceling other command, press
If you don t want to cancel any more numbers, press
t o s tandby mode.
2.8
.The
CANCEL LCD
again. Go back to step 2
CANCEL
STO P
.
.
STO P
, .
CANCEL CANCEL
.
( o r
BROADCAST
shows:
. The machine returns
STO P

Printing a delayed command list

shows:
Your machine can print a command list which tells you:
The command s identification number
The phone number, or remote location
The start time (this appears in a
A note telling if the command is a polling o r F-Code operation (see pages 3.14 3.15
o r
for more on polling and 3.25 3.34 for more on F-Code communication) .
To print a delayed command list, press Program key,
to return your

Printing a stored document

Your fax machine can print out each document stored for delayed transmission.
To print a stored document, you ll need to know the document s command number,
which you can get by either reviewing the commands or printing a delayed command
list (see above).
1 Press Program key,
Com. Stored Doc.
Command No.
2 Use the numeric keypad to enter the command s identification number, 1 99. F o r
example, we could enter the following for the very first command, 1 :
Com. Stored Doc.
Command No.
3 Press
ENTER
)t o
.
, : format)
D D H H M M
, 1 , 0 , 5
E
, 3 , 0 , 5 .The shows:
D ENTER LCD
:_
:1_
. Your fax machine will print a copy of the stored document.
.
ENTER