Settings For Operation; Setting The Silent Mode - Muratec MFX-1300/1700 Operating Instructions Manual

Settings for operation

Setting the silent mode

Default setting: O f f
Silent mode allows you to mute the ringer, the alarm and the key tones.
Ringer If you turn the ringer off in silent mode, a ring alerts you when you receive
fax or voice call and a call request.
Alarm If you disable the alarm in silent mode, the sound your machine makes
when an error occurs and the beep your machine makes after sending or receiving a
fax or making a copy cannot be heard.
Key tone If you mute the key tone, your machine will not make a sound when you
press the buttons on the control panel.
1 Press Program key, , 1 , 0 , 4 ,
B ENTER
Silent Mode :Off
/ /Enter
2 Press o r until the mode you want appears.
Note: If you chose O n, the silent mode of Ringer, Alarm o r Key tone can be set
to be available. If you chose O f f, the machine will ring and beep as
usual.
If you chose O f f, skip to step 10.
3
Press to save the setting. The
ENTER
o r o ff :
Ringer Silent :Off
/ /Enter
4 Press o r until the mode you want appears.
If you want to turn off the ringer, select On and the machine will be quiet.
Otherwise, the machine will ring.
5 Press to save the setting. The
ENTER
o r o ff :
Alarm Silent :Off
/ /Enter
6 Press o r until the mode you want appears.
.The shows your fax s current setting:
LCD
now asks if you want the ringer to be on
LCD
now asks if you want the alarm turned on
LCD
If you want to turn off the alarm, select On and the machine will be quiet.
Otherwise, the machine will beep.
7 Press to save the setting. The
ENTER
o ff :
KeyBuzzer Silent:Off
/ /Enter
8 Press o r until the mode you want appears.
If you want to turn off the tones, select On and the machine will be quiet.
Otherwise, the machine will beep when the keys are pressed.
9 Press to save the setting.
ENTER
If you turned off the alarm or the key tones in the steps above, your machine gives
you the option of setting the volume for the alarm and key tones. If this option
appears, skip to step 10.
If you didn t turn any of these off, your fax machine returns to standby mode.
10 The shows your fax s current setting:
LCD
Alarm&Key Volume:Mid
/ /Enter
11 Press o r until the mode you want appears.
Below are the possible settings:
Alarm&Key Volume:Max
/ /Enter
Alarm&Key Volume:Mid
/ /Enter
Alarm&Key Volume:Min
/ /Enter
12 Press to save the setting.
ENTER
Changing the default settings
now asks if you want the key tones on or
LCD
= Loudest setting.
= Medium setting.
= Low setting.
4.9