Muratec MFX-1300/1700 Operating Instructions Manual page 99

Plain-paper digital fax/copier/printer
Table of Contents

Advertisement

Advanced features
6
Press
.The
asks which list you want to program into the programmable
ENTER
LCD
one-touch:
P2:Machine Settings
/ /Enter
7
Press
until the list you want appears.
8
Press
.
ENTER
9
Press
to return your machine to standby mode.
STO P
3.46
Programming a document storage operation
If you want to program a programmable one-touch key to store an F-Code polling docu-
ment, two things must be true:
The F-Code bulletin box must exist on your fax machine.
You must know the F-Code bulletin box s two-digit number (01-50) and name.
To program your programmable one-touch to store a regular polling document or
F-Code polling document:
1
Press Program key,
, 3 , 0 , 1 ,
A
ble one-touch number available:
Select Program No.
P2:No Number Stored
Note: I f P2 appears on the
LCD
b e r f o r P1. You can see what you programmed into P1 by pressing
you want. For example, if you set P1 for storing of the polling document,
you will see:
Select Program No.
P1:Polling Document
Press
to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was to store a document and you
want to keep this key programmed to store a document, use these
instructions to make changes. But if you want to assign this key to a com-
p l e t e l y d i fferent operation (for a delayed transmission, for example), then
you first must erase the stored command before programming the new
one.
3
If you want to select a different programmable one-touch key than the one that
appears on the
, press that key now.
LCD
4
Press
.The
asks which operation you want to program into the pro-
ENTER
LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
.The
shows the first empty programma-
ENTER
LCD
, it means that you have already entered a num-
, i f

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-1300Mfx-1700

Table of Contents