Muratec MFX-1300/1700 Operating Instructions Manual page 89

Advanced features
4 Press .The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
5 Press u n t i l Communication appears.
Type :Communication
/ /Enter
6 Press .The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7 Use the numeric keypad to enter the number exactly as your machine should dial
it, including whatever codes your phone system requires. The number can be up
to 40 characters in length:
P2:Fax#/Advan.Func.
9-5550629_
Your display can show only 20 characters at a time. To view characters beyond
those 20, press t o s c r o l l t o t h e l e ft o r
Important: Do not press
8 Now, while you can still see the fax number on the
,
A D VA N C E D FUNCTIONS ENTER
Delayed
Enter Time: 11/20:30
9 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, Do this at 5:05
To select this option, use the numeric keypad to enter the date and
time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
3.36
P2:Fax#/Advan.Func.
o r
9-5558743_
t o s c r o l l t o t h e r i g h t .
.
ENTER
,press
LCD
. The shows:
LCD
on the 30th. )
P M
Option 2: Perform the command at a certain time each day you press the
key.(For example, Do this at 5:05
To select this option, use the numeric keypad to enter 0 , 0 and then
the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
10 Press , . The asks if you want to make additional settings for this
ENTER ENTER LCD
programmable one-touch number.
Option :Off
/ /Enter
I f y o u do not want to make additional settings, press
I f y o u do want to make additional settings, press
11 The asks which resolution you want to use for this programmable one-touch
LCD
number.
Resolution :------
/ /Enter
12 Press until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to spec-
ify the displayed setting for this programmable one-touch key.
13 Press . The asks you to select a contrast mode for each programmable
ENTER LCD
one-touch number.
Contrast :-------
/ /Enter
14 Press until the mode you want appears.
15 Press . The asks if you want the memory transmission on or off when
ENTER LCD
using this programmable one-touch number.
Memory Tx :---
/ /Enter
16 Press until the mode you want appears.
today. )
P M
.Then skip to step 24.
ENTER
and .
ENTER