Table of Contents
Advertisement
St acking multiple copies
1
Press
/
to change to Copy mode.
C O P Y
FA X
2
Press
to turn the sort setting off .
S O R T
Note: The default setting of sorting is O n. To change the default setting, see
page 4.7.
3
Place your original document in
as you would to send a fax.
4
Enter the document size by pressing the
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction or enlargement ratio
Note: For details about each items, see Making copy settings, pages
2.15 2.16.
7
Press
.
STA R T
Note: To stop the copying, press
STO P
Sorting multiple copies (using
Note: You cannot use the
glass for sorting multiple copies.
FBS
1
Press
/
to change to Copy mode.
C O P Y
FA X
2
Make sure the
on
glows, which means the sort setting is turned on.
LED
S O R T
Note: If it does not glow, press
3
Place your original document in
4
Set the document size by pressing the
5
Using the numeric keypad to enter the number of copies you want (up to 99).
6
As needed, set the following:
Select document type and adjust image contrast
Set copy reduction ratio
Note: For details about each items, see Making the copy settings, page 2.15.
face up, or on the
glass face down j u s t
ADF
FBS
.
D O C U M E N T SIZE
.
)
ADF
t o t u r n i t o n .
S O R T
face up, just as you would to send a fax.
ADF
.
D O C U M E N T SIZE
7
Press
.
STA R T
Note: To stop the copying, press
STO P
Enlarged o r reduced copies
Your fax machine is capable of enlargement and reduction when copying.
Note: The copy enlargement and reduction rate setting is available only for copying,
not for faxing.
Important:
Copy enlargement is available only for copying using the
available for copying using the
1
Press
/
to change to Copy mode.
C O P Y
FA X
2
Place your original document in
as you would send a fax.
Note: If you want to enlarged copy, u s e
3
Enter the document size by pressing the
4
Choose an enlargement or reduction ratio using
You can reduce to 78%, 64 % or 50 % of the original size
O R
You can enlarge to 129% or 200 %
O R
Press
to turn the
light on, and adjust the ratio at 1% steps using
Z O O M
Z O O M
of the cursor key. You can enter the ratio between 50% and 200%.
O R
Directly enter any percentage between 50 % and 200 % by following procedure.
1. Press #.
2. Using the numeric key to enter your desired ratio (50 to 200).
3. Press # again.
129%: Half-letter (5.5" 8.5")→ Letter (8.5" 11")
78%: Legal (8.5" 14")→ Letter (8.5" 11")
Helpful Ti p : You can set the copy reduction or enlargement ratio to Auto . (See
Setting copy auto, page 4.7.) If the Auto is set and you set the
document size by pressing
cally reduce or enlarge the original size (you entered) to fit on the
paper size you selected.
.
; i t i s n o t
FBS
.
ADF
face up, or on the
glass face down j u s t
ADF
FBS
glass.
FBS
.
D O C U M E N T SIZE
o r
of the cursor key.
, the machine automati-
D O C U M E N T SIZE
Basic operation
o r
2.13
Advertisement
Chapters
Table of Contents
