Table of Contents
Advertisement
7
The
now asks if you want to set the calendar/clock to automatically
LCD
recognize daylight saving time (
) .
DST
Daylight Saving :Off
/ /Enter
When the setting is On, your machine automatically recognizes
appropriate switchover Sundays each year.
When the setting is O f f , no automatic change will occur.
8
Press
o r
until the mode you want appears.
Here, we ve changed the setting to O n:
Daylight Saving :On
/ /Enter
9
Press
to save the setting and continue.
ENTER
10
The
now asks you to enter your fax number as you want it to appear on other
LCD
fax machines displays or printouts . The fax industry term for this
number is Subscriber
.
ID
Your Fax Number
11
Use the numeric keypad to enter the fax number. The number may contain up to
20 characters.
Your Fax Number
9725555525_
Note: If you make a mistake, press
CANCEL
To change just one number, press
Press
to erase the number. Then re-enter the fax number cor-
CANCEL
r e c t l y.
12
Press
to save the number.
ENTER
13
The
now asks you to enter the name you want to appear at the top of faxes
LCD
you send. The name may be up to 22 characters in length.
Use the one-touch keys to enter letters and other non-numeric characters.
(Refer to Entering characters on page 1.12.)
Your Name
;Upper
_
14
Press
to save the setting and continue.
ENTER
a t 2
on the
DST
A M
to erase to the left .
to move left , o r
to move right.
15
The
now asks you to enter the type of dialing needed for the fax machine,
LCD
e i t h e r tone o r pulse:
Phone Type
:Tone
/ /Enter
16
Press
o r
until the mode you want appears.
Here, we ve changed the setting to Pulse mode:
Phone Type
:Pulse
/ /Enter
17
Press
to save the setting and continue.
ENTER
18
The
now shows the machine s current reception mode.
LCD
Fax Ready
/ /Enter
19
For now, press
o r
until the setting Fax Ready appears. (This setting can
always be changed. We ll discuss reception modes further on pages 2.10 2.11 . )
20
Press
to save the setting and continue.
ENTER
21
The
now asks you to enter the time for the sleep mode. Your machine will
LCD
automatically enter sleep mode after your selected idle time has elapsed.
Sleep Mode Timing
(001-240)
005 min.
22
Enter the time (in minutes) using the numeric keypad.
23
Press
to save the setting. Your machine will return to standby mode.
ENTER
Getting started
1.19
Advertisement
Chapters
Table of Contents
