Special Copy Function - Muratec MFX-1300/1700 Operating Instructions Manual

Special copy function

Negative/Positive (reversing black and white areas)
If using this feature, the black and white areas of the original are reversed.
Note: You cannot combine this feature with Reduced or Enlarged copies.
Helpf u l t i p : If you programmed a Soft key to turn on or off this feature, simply press-
ing that key will turn on or off t h i s f e a t u r e .
1 Make sure the machine is in the Copy mode.
2 Place your original document in
3 Enter the document size by pressing the
4 Press ,
A D VA N C E D FUNCTIONS ENTER
Nega/Posi :Off
/ /Enter
Note: This feature is O f f for default setting. However, you can turn it on for the
default. (See page 4.7.)
5 Press o r until the setting you want appears.
In this example, we ve chosen On.
Nega/Posi :On
/ /Enter
6 Press to save the setting. The machine returns to the standby mode with
ENTER
following display:
Copy <Nega/Posi>
Ltr Auto 100%
7 As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
8 Press .
STA R T
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
STO P
face up, or on the glass face down.
ADF FBS
.
D O C U M E N T SIZE
. The shows the current setting:
LCD
1
.
C O P Y RESET
.
Combine
( This mode is available only on the MFX-1700.)
This feature allows you to copy from four one-sided origi-
nals to one sheet of paper.
Note: When using the Combine mode, the magnification
ratio is automatically set to 50%. However, you
can change it manually from 50 to 200 % if you
want.
Note: Although you can use Combine with the Ultra copy resolution, pa r t o f o r i g i n a l
image might be not copied. Ultra copy resolution only allows you to copy docu-
ments at 100 %. Images cannot be enlarged or reduced.
1 Make sure the machine is in the Copy mode.
2 Place your original document in
3 Enter the document size by pressing the
4 Press . The machine will return to the standby mode with following dis-
COMBINE
play:
Copy <Combine>
Ltr Auto
Note: I f i s not assigned to a Soft Key, press
COMBINE
. Then select O n by using the cursor key and press
ENTER
page 4.8 to change the default setting.)
5 As needed, set the following:
Document type and Image contrast
Number of copies
Copy reduction or enlargement ratio (50 200%).
6 Press .
STA R T
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
STO P
face up, or on the glass face down.
ADF FBS
.
D O C U M E N T SIZE
1
50%
A D VA N C E D FUNCTIONS
ENTER
.
C O P Y RESET
.
Basic operation
twice,
. (See
2.17