Muratec MFX-1300/1700 Operating Instructions Manual page 81

Advanced features
Erase Tx Doc Erasure of transmitted documents tells your machine if it should
erase a document from the box after a caller retrieves (polls) the
document.
Erase Tx Doc.
On: Your machine erases the document from the box as soon as it sends it. If
you choose On , this box can be polled only once per document.
Off : Your machine does not erase a document from the box when it s polled. As
long as your machine holds
from the box, the document is available indefinitely for polling.
Press o r until the mode you want appears.
Press to save the setting. Then skip to step 24.
ENTER
If you chose Security:
17 The machine asks how long you want to keep a document stored in your
machine s F-Code box. The
F-Code Doc Hold Time
Hold Time (00-31):00
18
Use the numeric keypad to enter a two-digit number indicating how many days
(00-31), you want your fax machine to keep received documents in this F-Code
box. Here, we ve entered 09, for nine days:
F-Code Doc Hold Time
Hold Time (00-31):09
Note: Your fax machine can store incoming documents in F-Code boxes (up to
30 documents) as long as 31 days, after which it automatically erases the
documents. But if your machine has plenty of memory, you may want to
override the 31-day limit in order to keep the documents indefinitely. I f s o ,
enter 00. If you choose this, you will have to delete documents manually.
(You may want to contact your authorized Muratec dealer regarding
optional memory expansion.)
19 Press to save the settings. Skip to step 24.
ENTER
If you chose Relay:
20 The machine asks for the fax number for the remote unit.
The shows:
LCD
Enter Relay Number
_
3.28
:Off
/ /Enter
power and you do not erase the document
A C
shows:
LCD
21 Enter the fax number using a one-touch key, a speed-dial number or a call group
number. You cannot use the numeric keypad to enter these numbers.
To add each fax number, press
then enter the number. You can specify up to 200 numbers for a remote unit.
Enter Relay Number
S001,G12_
22 Press to save the settings. The
ENTER
Select TTI :Sender
/ /Enter
The machine asks for the type of
relayed to other callers.
Sender Relay the document with sender unit s
Both Relay the document with both the sender unit s
Yours Relay the document with your
Press o r until the mode you want appears.
23 Press to save the settings. The
ENTER
Auto Print :Off
/ /Enter
On: Print the document automatically when it s received.
Off : The machine does not print it, but only relays it to the other machine.
Press o r until the mode you want appears.
Then press to save the settings and go on to step 24.
ENTER
24 The machine asks for your F-Code box s four-digit security
. . code for the box s security, which you use to ( 1 ) print a document any remote
I D
F-Code-compatible fax sends to this F-Code box or ( 2 ) you enter before you can
make any changes to this F-Code box.
03:Set F-Code Box
Enter I.D. Code:0000
If you do not want to change the
25 Decide on a four-digit . . code (0001-9999) for this F-Code box.
I D
W rite it down, and put it in a safe place.
Important: Do not use 0000 as an
between each one to insert a comma,
BROADCAST
shows:
LCD
you want to appear on the faxes that are
TTI
( don t send your
TTI
and your
TTI
instead of the sender unit s .
TTI
shows:
LCD
. . code. This is the
I D
. . code, skip to step 27.
I D
. . code.
I D
) .
TTI
.
TTI