Making Copies; Basic Copying - Muratec MFX-2550 User Manual

Making Copies

This section describes the basic procedure for making copies. For the detailed procedure,
see the Copier Guide.

Basic Copying

1
Load the document, and press <Copy>.
For details on loading documents, refer to
2
Set the document type and contrast as necessary.
• To set the document type, press [Doc. Type], and select the desired document type. Press
[Enter].
• To set the contrast, press [Contrast], and select the desired contrast. Press [Enter].
3
Use the numeric keys to enter the number of copies.
• You can set 1 to 99 copies.
• When the number of copies is not set, one copy will be made.
4
Press <Start>.
2-2

Making Copies

"Doc. Type"
setting key
"Contrast"
setting key
"Loading Documents". (See page 1-32.)