Muratec MFX-1300/1700 Operating Instructions Manual page 138

Q: Can I transmit a document that s extra long?
A: Ye s , i f the receiving fax machine is equipped to handle long documents. Many
machines have a special setting which allows them to receive documents t h a t
exceed the normal length.
Q: Can I transmit a page from a newspaper?
A: No. A newspaper page can jam in your document feeder. First, use a copy machine
to make an appropriately sized copy of the newspaper page, then transmit the
copy.
Q: Can I transmit a page with correction fluid on it?
A: Ye s , b u t o n l y i f t h e f l u i d i s completely dry before you begin transmission.
Q: How can I be sure my fax was received?
A: Set your machine to print a confirmation report after each transmission (see pages
3.22).
Q: I don t want to install a dedicated phone line for my fax machine, so I ve connected
the machine to a phone system. When I get a fax call, a l l the phones ring. How
PBX
do I prevent this?
A: Call your manufacturer or telephone company for assistance. They may be
PBX
able to convert one of the lines for use only by your fax machine.
PBX
Q: Sometimes when I dial a fax call by using either the optional handset or
/ ,I don t hear the fax receiving tones from the other machine.
MONITO R CALL
Am I doing something wrong?
A: When this happens, try pressing
you re using it), as usual. It s possible you re calling an older, non-standard fax
machine that doesn t emit answering tones. Even a few Group 3 faxes (see
Glossary, page 5.18) on the market sound a sending tone but don t sound a
receiving tone. A fter you transmit, call the person at the other fax machine s loca-
tion to see if that person got your document.
Q: I inserted a document in the feeder and dialed a fax number, but my machine didn t
transmit the document. Instead, ** Auto Redial ** now appears on my
What does this mean?
A: The remote fax machine was busy, so your machine will try the call again, automat-
i c a l l y. As long as it hasn t stored more than 99 delayed commands (counting
automatic redials), your machine should still accept commands from you. If it has
exceeded this quantity and will accept no more commands, try canceling one of the
delayed commands (see page 2.8). If the machine s t i l l won t cooperate, keep can-
celing commands until it does.
(and then hanging up the optional handset if
STA R T
Q: The specifications (page
I transmit a page it can take much longer. Why?
A: W e base this specification on transmission of an industry-standard test document
called - Test Document 1 (sometimes also called the Slerexe letter ). Fax man-
ITU T
ufacturers use this method to test transmission speeds. However:
The pages you send may be darker, or otherwise contain more information, than
- Test Document 1.
ITU T
The transmission time measured for test documents doesn t include handshake
time the time during which two fax machines introduce themselves to each
other and agree on the parameters of the call.
The specification time is based on the use of normal resolution mode. You may
be using fine, superfine or grayscale transmission, each of which takes longer
than normal mode.
Q: What s a default?
A: A default is a setting that your machine will always refer to if nothing else is pro-
grammed. For example, you can set the default for this machine to send a fax by
u s i n g i ts memory. If you set this action as the default, that s how your machine will
always send a fax, until you tell it to do differently.
Reports
Q: I called the number 011-555-555-1212, but not all of the digits appear on my trans-
mit confirmation report (
sure my document went to the right location?
A: The numbers you enter using the fax keypad are temporarily stored in a memory
buff e r, a n d i t s only the last part of the phone number that the buffer remembers.
An easy way to avoid getting incomplete telephone numbers on your printouts i s t o
store your most frequently used numbers as one-touch keys or speed-dial num-
bers. These autodialer numbers will appear in their entirety on your
.
LCD
. 1) list an average per-page transmission time, but when
A I
). Why didn t the whole number appear? How can I be
T C R
Just in case
.
T C R
5.15