Making Copies; Making Copies Using The Adf; Making Copies Using The Document Glass - Muratec PLAIN-PAPER DIGITAL FAX/COPIER/PRINTER/SCANNER MFX-1330 User Manual

Making copies

Making copies using the ADF

1
Switch the machine to copy mode by pressing
Copy Ready
Auto
2
Place your document face up on the ADF and adjust document guides to the docu-
ment size.
3
As needed, set the copy settings including the document type and scanning contrast,
number of copies, zoom ratio and sort setting. See "Basic copy settings" on page 7.4.
To clear the settings, press
4
Press
START
To stop copying, press

Making copies using the Document glass

The document glass is available only for MFX-1330 model.
1
Switch the machine to copy mode by pressing
Copy Ready
Auto
2
Make sure that there is no document on the ADF. If a document is on the ADF, it
takes priority over the document on the document glass.
3
Place your document face down on the document glass and align it to the left upper
corner. Then close the platen cover.
4
Press
DOC
5
As needed, set the copy settings including the document type and scanning contrast,
number of copies, zoom ratio and sort setting. See "Basic copy settings" on page 7.4.
To clear the settings, press
6
Press
START
To stop copying, press
01
Ltr 100%
.
RESET
to begin copying.
.
STOP
01
Ltr 100%
. to select the document size, Letter, Half-letter
SIZE
.
RESET
to begin copying.
.
STOP
.
COPY  FAX  SCAN
.
 
COPY FAX SCAN
or Legal.
C
OPYING
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
7.3