Table of Contents
Advertisement
Just in case
What you see on the
LCD
Document Full
Document Jam
ContStor Enter/Cancl
Document Stored
Enter No. (0-32)
Enter Reduce/Enlarge
Enter Scan Size
Feeder In Use
5.6
What it means/What to do
You tried to enter an document into an F-Code
box, but the machine has reached its capacity (30
documents ) . Delete documents stored in
F-Code boxes until the machine will let you pro-
ceed.
An original document jam while you are using
t h e
for either faxing or copying. See page 5.1
ADF
for instructions on clearing the jam.
You tried to erase a batch box which contains at
least one document. Erase the document(s), then
try again.
You tried to enter a call group number greater than
3 2 . Your machine can maintain 32 call groups ,
numbered 1-32 (call group 0 covers all the
groups ) . Determine the correct call group identifier
number and enter it, instead.
You tried to copy your document on the paper
other than Letter, Legal or Half letter sized paper
using the bypass tray, or the calculated reduction
or enlargement ratio is out of the acceptable range
(50 200 %) when the copy reduction or enlarge-
ment ratio is set to Auto .
Enter the reduction or enlargement ratio manually
although a part of the image might be lacked, or
change the paper for copying.
When you using the
(Flatbed scanner) glass,
FBS
you must manually enter the scan size of your
document. Press
to choose the
D O C U M E N T SIZE
s i z e .
The command you re trying to enter requires the
use of the
, which is already in use. W a i t f o r t h e
ADF
machine to stop using the
, then try again.
ADF
What you see on the
LCD
Hang Up Phone
In Relay Box
In Secure Box
In Use in P OneTouch
Invalid I.D. Code
Invalid Number
Invalid Paper Size
Invalid Passcode
Line Busy
What it means/What to do
The optional handset is off-hook.
Hang it up, making sure the upper part of the
handset presses down on the hook button.
You tried to store a document for polling in an F-
Code box which is set to be a relay box.
Select an F-Code box which is set to be a bulletin
box, then try again.
You tried to store a document for polling in an F-
Code box which is set to be a security box.
Select an F-Code box which is set to be a bulletin
box, then try again.
You tried to erase the F-Code box or Batch box,
which is programmed in the programmable one-
touch key.
Erase the programmable one-touch key that con-
t ains the F-Code box or Batch box you want to
erase, then try again.
The F-Code box
.
.code you entered isn t valid.
I
D
Try re-entering your F-Code box
.
.code.
I
D
You pressed a key which has no function during
the current operation.
If the optional printer controller is attached to your
machine, it can use the special sized paper with
the bypass tray. However, it should be used only
for the PC printing, it cannot be used for copying.
So, if you tried to copy onto the special sized
paper with bypass tray, this message will appear.
The protection passcode you entered isn t valid.
Repeat the operation, entering the correct protec-
t i o n passcode.
You tried to erase a document which someone is
polling from your machine. W ait for the fax to com-
plete the polling operation, then try again.
Advertisement
Chapters
Table of Contents
