Table of Contents
Advertisement
12
Next, the machine asks for your F-Code box s password. This is the password for
-
-compatible F-Code fax transactions. The
ITU
T
03:Password
_
Note: You don t need to have a password for the F-Code box. However, using a
password will make your F-Code communication much more secure.
I f y o u do not want to enter or change this box s password, skip to step 14.
13
Use the numeric keypad to enter this box s
word can be up to 20 characters in length and include any combination of
numbers and the * and # characters (but no other non-numerical characters).
Here, we ve entered 135*7#9.
03:Password
135*7#9_
Note: You cannot change the type of an existing F-Code box. If you re modify-
ing an existing F-Code box and want to change the box type, y o u f i r s t
must erase the old box, then create a new one.
14
Press
to save the password. The
ENTER
Box Type
:Bulletin
/ /Enter
The fax machine is asking which box type you want to assign to this box
l e t i n, security o r relay.
Press
o r
until the type of box you want appears.
15
Press
.
ENTER
If you chose Bulletin, go on to step 16.
If you chose Security, skip to step 17.
If you chose Relay, skip to step 20.
If you chose Bulletin:
16
The bulletin box has four additional settings:
Reception protection ( Rx Protect on the
Automatic printing of received documents ( Auto Print )
Overwriting documents ( Overwrite Doc. )
Erasure of transmitted documents ( Erase Tx Doc. )
shows:
LCD
03:Password
o r
123456789*#_
-
-compatible password. This pass-
ITU
T
now shows:
LCD
b u l-
)
LCD
Rx Protect
Reception protection t e l l s t h i s b o x i f i t s okay to receive
documents from remote locations. Callers can then poll these documents .
Rx Protect
/ /Enter
On: Do not open this box to receive documents from callers.
Off : Open this box to receive documents from callers.
Press
o r
until the mode you want appears.
Then press
to save the setting and go on to the next one.
ENTER
Auto Print
Automatic printing of received documents tells the fax machine if it
should print a document automatically upon receiving it into this box.
Note: This setting is available only when the reception protection (Rx protect)
setting is set to o f f (see above).
Auto Print
/ /Enter
On: Print the document automatically when the box receives it.
Off : Print the document manually, when you want to print it.
Press
o r
until the mode you want appears.
Then press
to save the setting and go on to the next one.
ENTER
Overwrite Doc
Overwriting documents tells your machine if it should overwrite
(erase) existing documents when it receives a new one.
Note: This setting is available only when the reception protection setting is set
t o o ff ( s e e Rx Protect above).
Overwrite Doc.
/ /Enter
On: When your machine receives a new document into this box, it will erase any
documents currently stored in it.
Off : When your machine receives a new document into this box, it w i l l n o t erase
the documents s t o r e d i n i t . Your machine can store up to 30
documents (each document can include one or more pages) in each box.
Press
o r
until the mode you want appears.
Then press
to save the setting and go on to the next one.
ENTER
Advanced features
:Off
:Off
:Off
3.27
Advertisement
Chapters
Table of Contents
