Table of Contents
Advertisement
7
Gently clean the LED print head using
the cleaning paper included in the toner
cartridge carton box.
For best print quality, you should clean
the LED head every time you change
the new toner cartridge.
Note: Do not use abrasive materials
on the LED print head, and do
not subject the LED print head
to strongly shock.
8
Gently close the printer cover.
9
Close the top cover. Be sure to push on a portion of the cover to lock it into its
original (closed) position.
Note: The fax machine will not work if the cover isn t closed properly.
A t tach the paper-handling pa r ts
1
A t tach the document tray by inserting it into the appropriate holes, as shown.
2
A t tach the extension paper tray by inserting its two pegs at a slightly upward
angle into the appropriate holes, as shown.
Plug in and power up
1
Plug one end of the telephone line cord into the
side and the other end into a standard telephone wall jack.
2
Plug the non-pronged end of the AC power cord into the AC power cord jack on
the right rear side of the machine and the pronged end into a 120 V electrical out-
let (preferably on a surge suppressor, as mentioned on page 1.5).
Important:
Be sure that you do not turn the power on (next step) until after you
have unlocked the mirror carriage locking plate. (see page 1.5).
3
Use the AC power switch to turn on your machine. The markings are international
s tandards: I means on, O means off .
I t w i l l take a few seconds for the machine to warm up. The
** Warming Up **
When the machine is ready to use (standby mode), you will see:
Copy Ready
1
Ltr
Auto
100%
Getting started
jack on the machine s rear
LINE
shows:
LCD
1.7
Advertisement
Chapters
Table of Contents
