Table of Contents
Advertisement
Changing the default settings
Setting Sleep mode ( Energy saving mode)
Default setting: O n
Your machine is initially set to be in the Sleep mode automatically when 5 minutes has
passed after you pressed any key last.
If you want to set the Sleep mode to O f f, you can set it here.
Note: If you want to change the time, see page 1.19.
1
Press Program key,
, 1 , 0 , 5 ,
B
Sleep Mode
/ /Enter
2
Press
o r
until the mode you want appears.
3
Press
to save the setting.
ENTER
Helpful Ti p : Pressing
ENERGY S AVING
mode immediately regardless of this on/off setting and the time setting on
page 1.19.
Note: A l l
lamps on the control panel will not be off, even when the machine is in
LED
the sleep mode.
Primary mode
Default setting: None
You can set the primary standby mode in this operation. A fter finishing any jobs, your
machine will return to the mode you set here immediately.
1
Press Program key,
, 1 , 0 , 7 ,
B
Primary Mode
:None
/ /Enter
2
Press
o r
until the mode you want appears.
3
Press
to save the setting.
ENTER
4.10
.
ENTER
:On
, you can make the machine to be in the Sleep
.
ENTER
Setting the paper source
Default setting:
1st cassette: Fax/Copy, Bypass Tray: Fax/Copy
You can choose one of following for each paper source:
Fax :
Select this if you want to use the paper source you selected for faxing
and list (or report) printing.
Copy :
Select this if you want to use the paper source you selected for copying
only.
Fax/Copy : Select this if you want to use the paper source you selected for faxing,
list (or report) printing and copying.
Not Used : Select this if you want to use the paper source you selected for PC
p r i n t i n g .
Note: PC printing is available only when your machine has the
optional printer controller kit.
1
Press Program key,
, 1 , 0 , 9 ,
B
ENTER
Cassette1
:Fax/Copy
/ /Enter
2
Press
o r
until the mode you want appears.
3
Press
to save the setting. The
ENTER
Bypass Tray:Fax/Copy
/ /Enter
4
Press
o r
until the mode you want appears.
5
Press
to save the setting.
ENTER
Setting 2-bin t r a y (Option)
Default setting:
Copy exit: Lower tray, Fax exit: Upper tray, List exit: Upper tray, PC-
Fax exit: Upper tray
You will set where to exit the printed paper in this operation.
Note: This operation will appear only when your machine has the optional 2-bin tray
u n i t .
1
Press Program key,
, 1 , 1 , 0 ,
B
ENTER
2-Bin Tray
:Off
/ /Enter
. The
shows:
LCD
shows:
LCD
.
Advertisement
Chapters
Table of Contents
