Reviewing Or Canceling Commands - Muratec MFX-1300/1700 Operating Instructions Manual

3 Your machine can remember the last 10 dial numbers. Press
dial number you want to redial appears.
4 Press .
STA R T
To redial a fax call manually with the
handset:
1 Make sure the document is in the
s e t .
2 Press / o r l i ft the optional handset to get a dial tone.
MONITO R CALL
Note: If you want to use
MONITO R
advance. (See page 3.16.)
3
Press / . The will show:
REDIAL PA U S E LCD
View Redial History
0:1234567890
4 Your machine can remember the last 10 dial numbers. Press
dial number you want to redial appears.
5 When you hear fax tones from the remote unit, press
Note: If a person answers the phone, use the optional handset to tell that per-
son you re sending a fax. When you hear fax tones, press
To redial a voice call manually using the optional handset:
1 L i ft the optional handset to get a dial tone.
2 Press / . The will show:
REDIAL PA U S E LCD
View Redial History
0:1234567890
3 Your machine can memory the latest 10 dial numbers. Press
number you want to redial appears.
4 Press .
STA R T
When the other person answers, use the optional handset to speak to that per-
son.
o r u n t i l t h e
/ key or an optional
MONITO R CALL
and that the resolution and contrast are
ADF
/ key, you should assign it to a Soft k e y i n
CALL
o r u n t i l t h e
.
STA R T
STA R T
o r u n t i l t h e d i a l

Reviewing or canceling commands

Your fax machine can store many jobs in its memory. And it keeps track of each one
by assigning it a command number, l i k e C 0 1 .
Delayed commands, redial attempts and current fax transmissions are all stored in your
fax machine s memory and given a command number. Your machine can store up to 99
delayed commands. It identifies each by a two-digit command number ranging from 01 t o
99.
The Review Commands function gives you the power to check on each job (or
command) in your machine s memory. I t a l s o l e ts you cancel a command if you decide
not to send the document.
To see your machine s stored commands or to cancel them:
1 Press .
C O M M
C01:5552009
The shows the f i r s t command, indicated by its command number and the
LCD
phone number it will dial.
If your machine is attempting to perform a command now, it appears on the
display.
Note: If there are no stored commands in your machine, the
.
No Command
Press
Or, if you want to see the result of fax transaction, press
CANCEL
Here, you see command 01, followed by the number it s set to dial. If the com-
mand is to send a broadcast, Broadcast appears instead of the phone number.
(See Broadcasting, page 3.9.)
If the command is to send a batch transmission, t h e
number (such as B01 ) rather than the command number. (See Batch transmis-
sion, pages 3.11 3.13.)
If the command is for a Call group dialing, the group number (such as G01 )
appears instead of the phone number. (See Call group dialing, page 3.7.)
2
Press o r
/ .The will show:
CANCEL CONFIRM LCD
/ / /Cancel
to return to standby mode.
STO P
/ .(See View the result of fax transaction on page 2.9.)
CONFIRM
to scroll through currently stored commands.
Basic operation
will show:
LCD
.
C O M M
shows its batch box
LCD
2.7