Setting Block Junk Fax - Muratec MFX-1300/1700 Operating Instructions Manual

3 Press to save the setting.
ENTER
Note: If you press without entering the
ENTER
cates No Number on the
PIN
4 Continue with the steps for creating or modifying a batch box (pages 3.11 3.12).
Now you can perform batch transmission to this box while the
, the fax machine beeps , i n d i-
PIN
and then returns you to step 2.
LCD
mask is activated.
PIN

Setting Block Junk Fax

Your fax machine s Block Junk Fax feature lets you bar the gates against unauthorized
incoming faxes ( junk fax ). But before you block junk fax, first understand how this fea-
ture works, to determine if it s right for you. There are four possible settings for Block
Junk Fax:
O f f The feature isn t activated.
Mode1 Your fax machine checks whether the last four digits of any phone number
in your autodialer matches the last four digits of the remote fax s subscriber
phone number pa r t o f t h e ). If it doesn t find a match, your machine disconnects
TTI
t h e c a l l .
Mode2 This mode rejects any call from a number whose last eight digits match
any number in the blocked numbers list (explained later). Your machine can hold up
to 50 blocked numbers.
Mode3 T h i s r e j e c ts numbers that are not in the autodialer and also rejects numbers
t h a t are in the blocked numbers list. This lets you keep a number on your autodialer
for transmission to it, while still blocking its incoming calls by putting it in the blocked
numbers list.
But before you activate the Block Junk Fax feature, please consider:
Not all fax machine owners enter their phone numbers in their Subscriber
W ith Block Junk Fax activated, your machine would reject faxes from these
machines.
Access codes can cause confusion. If an autodialer entry ends with extra codes,
such as long-distance codes, Block Junk Fax will block out calls from those faxes.
To s e t Block Junk Fax:
1 Press Program key, , 2 , 1 , 0 ,
B
Block Junk Fax:Off
/ /Enter
2 Press o r until the mode you want appears.
Here, we ve chosen Mode2.
Block Junk Fax:Mode2
/ /Enter
3 Press to save the setting.
ENTER
What you do next depends on what you selected in step 1:
If you selected O f f o r Mode1, press
If you selected either Mode2 o r Mode3, go on to step 4.
Advanced features
.The shows your fax s current setting:
ENTER LCD
t o r e t u r n t o s tandby mode.
STO P
(the
ID
s .
ID
3.53