Sending Faxes; Guidelines - Muratec MFX-1300/1700 Operating Instructions Manual

Sending faxes

Guidelines

You can send a fax message using the
(Flatbed Scanner) glass. Before you begin the fax sending, please read the following
guidelines.
Acceptable document sizes
You can set up to 50 sheets o f l e t t e r - , l e g a l - o r h a l f l e t t e r−sized document in the
one time. However, i t s possible to fax a piece of paper as small as a notepad sheet or
one up to three feet long.
The acceptable dimensions (widt h × length) are:
Automatic document feeder ( )
A D F
S -
INGLE SHEET
Maximum: 8.5" × 35.4"
Minimum: 4.7" × 3.9"
Flatbed scanner ( )
FBS
Maximum: 8.5" × 14.0"
Things not to put in your fax
To avoid paper jams and damage to your machine, don tinsert:
Folded, curled, torn, wrinkled or very thin pages
Documents with staples, glue, tape, paper clips or still-wet correction fluid
Sticky notes (or documents with sticky notes attached)
Cardboard, newspaper or fabric
Pages with duplicating carbon on either side
Credit cards or any small, thick items
O H P transparency film
(Automatic Document Feeder) or
ADF
M -
ULTIPLE SHEET
Maximum: 8.5" × 14.0"
Minimum: 5.8" × 4.1"
How to set the document
When setting the documents i n t h e
FBS
1 Insert your document(s) face up,
top edge first. If you re sending
a multi-page documents, fan the
pages slightly.
a t
ADF
2 Adjust the document width guide
to fit your documents .
Note: The can hold up to 50 pages of normal weight paper.
ADF
When setting the documents on the
1 Make sure the document is not
i n t h e .
ADF
2 L i ft the platen cover.
3 Set your document face down
on the glass. The document
FBS
should be aligned to the front
right corner.
4 Gently close the platen cover.
Important:
(Automatic Document Feeder)
ADF
(Flatbed Scanner) glass
FBS
Gently close the platen cover so that you don t catch your hands,
possibly injuring them.
Basic operation
2.1