Table of Contents
Advertisement
Check Message printouts
When there s a problem with a fax call and your machine detects an error, it produces
an error printout headed by the words Check Message. This printout lists the following
information about the transmission:
The resulting error code
A communications error message (see What error messages can mean, below)
The phone number (or
, if programmed) of the fax machine with which your
TTI
machine had attempted to communicate.
What error messages can mean
The error messages on Check Message printouts can mean a variety of things. Here s a
brief summary:
Error message
Check condition of remote fax.
Repeat transmission.
Line is busy.
Check received documents.
Memory full.
Dialing number is not set.
Stopped.
Possible meanings
Remote machine malfunctioned
No handshake signals from remote fax
Wrong phone number reached
Poor phone line conditions
No handshake signals from remote fax
Document misfeed or miscount
Unable to reach remote machine aft e r
attempting specified number of redial tries
Remote machine s line was busy
Remote machine s line didn t answer
Remote confirmation signal not received
from remote fax
Poor line conditions caused a poor image
Remote fax s memory is full
Stored phone number failed to dial properly
Someone pressed
at the remote fax
STO P
in the middle of the handshake
Just in case
5.11
Advertisement
Chapters
Table of Contents
