Memory Overflow Message; I F T H E Paper Runs Out While Copying; Making Copy Settings - Muratec MFX-1300/1700 Operating Instructions Manual

Memory overflow message

If you ve stored too much information in your machine s memory, a Memory Overflow
message may appear on the :
LCD
Memory Overflow
Start Or Cancel
This appears because ( 1 ) too many pages have been stored in the memory, or ( 2 ) the
pages that are stored have too much information on them for your fax machine to
remember.
If this message appears, press
STA R T
memory, or press to delete from memory all pages stored during the current
CANCEL
operation (but not previous operations).
Note: If you don t operate your machine within 60 seconds, the machine will automati-
cally print the document stored in the memory during the current operation.

I f t h e paper runs out while copying

When your machine runs out of paper, i t beeps, the red light
of the printer status lights glows and the
has run out of paper the 1st cassette, 2nd cassette (optional) or
the bypass tray.
In this example, the machine runs out of the paper in the 1st cas-
s e t t e :
1st Cassette
Please Supply Paper
If you want to cancel the current copying job, press
displayed paper source to resume the copying.
to tell your machine to copy as many pages in
shows which source
LCD
. Otherwise, supply the paper to
STO P

Making copy settings

When the machine is in the Copy mode, the
Copy Ready
Ltr Auto 100%
Number of pages
Use the numeric keypad to enter the desired number of copies for the document.
Copy reduction or enlargement rate
Your fax machine can make enlarged and reduced copies. For more information, see
Enlarged or reduced copies, pages 2.13 2.14.
Document size
To select the document size manually, press
document size appears. You can choose the Letter, Legal or Half letter:
Copy Ready
Ltr Auto 100%
Legl Auto
HLtr Auto
Note: When the document size is set to Auto (see Setting copy auto, page 4.7) you
may see the as below:
LCD
Copy Ready
[ Ltr ] Ltr
[ ] means the machine automatically select the document size.
Note: According to the magnification ratio or recording paper size, the document size
will be not displayed:
Copy Ready
----- Ltr
shows:
LCD
1
Number of copies
Copy reduction or enlargement ratio
Recording paper size
Document size
repeatedly until your desired
D O C U M E N T SIZE
1
1
100%
1
100%
1
100%
1
50%
Basic operation
2.15