Muratec MFX-1300/1700 Operating Instructions Manual page 103

Plain-paper digital fax/copier/printer
Table of Contents

Advertisement

Advanced features
6
If you want security reception to begin now (and at this same time every day),
skip to step 8.
Otherwise, go on to step 7.
7
Use the numeric keypad to enter the time (use a 24-hour format) when security
reception should begin every day. Type over the numbers displayed. Here,
we ve entered 17:35:
Security Rx
Enter Time:
To change a digit, press
correct digit.
8
Press
to save the setting.
ENTER
Helpf u l t i p : A fter setting for activating the security reception, you can assign the
security reception to the Soft key (see page 3.16) to turn it on and off .
Turning on the security reception by pressing a Soft key is not effected
the time setting you entered at step 7. It begins the security reception
immediately.
To turn the security reception on by pressing a soft k e y :
1
Program a Soft key for security reception. (See page 3.16.)
2
Press a Soft key that is assigned for security reception.
Enter Passcode :****
3
Enter the protection passcode and then press
The
briefly shows following and the
LCD
rity reception begins immediately.
** Sec. Rx Active **
Note: To turn the security reception off , s e e Printing from security reception/Turning
off security reception, next column.
3.50
17:35
to move to the left , o r
to move right. Then enter the
.
ENTER
of the Soft key will light and the secu-
LED
Printing from security reception / Turning off security reception
When security reception is on, an incoming fax goes directly into your machine s mem-
ory and the
light comes on. But the incoming fax message is not
M E M O RY RECEIVE
printed.
To retrieve the faxes received during this security reception (and to return your machine
to normal reception until the next time):
1
Press Program key,
, 3 , 0 , 4 ,
D
If you using the Soft key, press the Soft key instead of this operation.
In which way, t h e
shows:
LCD
Security Rx Doc.
Enter Passcode :****
2
Use the numeric keypad to enter the passcode. Here we ve entered 6296:
Security Rx Doc.
Enter Passcode :6296
3
Press
.
ENTER
If you ve entered the correct passcode, your fax machine will print all docu-
ments i n i ts memory and then erase them. Then it will turn security reception
o ff until the next time you ve scheduled security reception or the Soft key
which programmed security reception is pressed.
If you using the Soft key, t h e
If you ve entered an incorrect passcode, your fax machine will refuse to print,
and security reception remains on.
ENTER
light of the Soft key will be off .
LED

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-1300Mfx-1700

Table of Contents