Using As A Copier; Making Copies - Muratec MFX-2500 Operating Instructions Manual

Getting started

Using as a Copier

The following is a basic copy features. If you want to use advanced features, see
"Copy Reference".

Making copies

1
Make sure the machine is in the Copy mode. To change to the Copy mode,
press .
COPY
2
Press to clear the previous setting, if necessary.
RESET
3
Set your document. (See page 1.18.)
4
Set any settings you want.
5
If you want to make only one copy of each page of the document, skip to step
7. Otherwise, proceed to step 6.
6
Use the numeric keypad to enter the desired number of copies for each page
in your document. You can set up to 99 copies.
Note: To change the number entered, overwrite it with new number. If you
want to enter fewer than 10, enter the reading zero. (For example, 05.)
7
Press to begin the copying process.
START
Note: To stop the machine during multi copying, press
Note: To return the machine to the initial condition after copying, press
Note: By default, your machine make a copy with the following conditions:
Document type: Auto
Image contrast: Auto
You can change the default of these functions. See page 3.4 in "Copy
Reference.)
Note: If you do not operate the machine for a certain period after copying, the
machine returns to the initial display and after certain period, it reset the
any setting to the default. This is called "Auto Reset". You can change the
auto reset time. See page 3.5 in "Copy Reference.)
1.20
.
STOP
.
RESET