Muratec MFX-1300/1700 Operating Instructions Manual page 87

Advanced features
If in step 10 you chose an immediate transmission, your fax machine begins dialing. If
you chose a delayed command, the machine shows Reserved on the
that it has stored the command in memory and will complete it later.
F-Code polling
1 Press to switch the machine to Fax mode.
FA X
2 Press
A D VA N C E D FUNCTIONS
Enter Sub-Address
_
3 Use the numeric keypad to enter the appropriate sub-address.
In this example, we ve entered 123456.
Enter Sub-Address
123456_
Note: If you make a mistake, press
the correct number.
4 Press . The shows:
ENTER LCD
Enter Password
_
Note: If this sub-address does not have a password, skip to step 6.
5 Use the numeric keypad to enter the password. In this example, we ve entered
654321.
Enter Password
654321_
6 Press . The shows:
ENTER LCD
Enter Fax Number
_
7 Enter the fax number either by pressing a one-touch key, entering a speed-dial
number or dialing from the numeric keypad. Do not press
8 What you do now depends upon when you want the polling to begin.
To have it begin now, skip to step 11 .
To delay it, go on to step 9.
3.34
four times and then press .
ENTER
to erase the character, then enter
CANCEL
.
STA R T
9 Press
, indicating
LCD
Delayed
Enter Time: 15/17:05
10 Use the numeric keypad to enter the day and time when the polling should begin,
then press
11 Press
If in step 8 you chose an immediate polling, your fax machine begins dialing. If you
chose a delayed command, the machine shows Reserved on the
has stored the command in memory and will complete it later.
, . The shows:
A D VA N C E D FUNCTIONS ENTER LCD
.
ENTER
.
STA R T
, i n d i c a t i n g t h a t i t
LCD