Table of Contents
Advertisement
Just in case
What you see on the
LCD
Please Supply Paper
Please Wa i t
Polling In Use
Printer In Use
Protect Doc. Stored
Ration must be 100%
REPLACE DRUM SOON
REPLACE DRUM UNIT
PRINTER NOT USABLE
Scanner In Use
5.8
What it means/What to do
The paper cassette or bypass tray is out of paper.
Supply paper to the cassette and/or the bypass
t r a y.
Your fax machine s printer is either warming up or
busy. Please wait until the fax is finished printing
and then re-try your command or operation.
You tried to store the polling document in your fax
machine, where one already had been stored.
W ait for the fax to complete the regular polling
operation or delete the stored document, then try
again.
The command you re trying to enter requires the
use of the printer, which is already in use. W a i t f o r
the fax to finish printing, then try again.
A received document was in your fax s memory
when you tried to turn off the security reception
passcode. Print the received document from your
f a x s memory, then retry the desired operation.
You cannot set the magnification ratio in
Negative/Positive copy or Ultra copy mode.
Set the magnification ratio to 100 % to use the
Negative/Positive copy or Ultra copy mode.
Your drum will need to be replaced soon.
Please contact your authorized Muratec dealer to
purchase a new drum cartridge if you don t
already have one.
Your drum cartridge doesn t work.
Your machine cannot print until it is replaced with a
new drum cartridge.
Replace it.
The command you re trying to enter requires the
use of the scanner, which is already in use. W a i t
for the fax to complete the scan, then re-try the
desired command.
What you see on the
LCD
SecurityRx is Off
Select Paper Size
Sub-address In Use
TONER ALMOST EMPTY
TONER EMPTY
PRINTER NOT USABLE
Too Many Characters
Too Many Locations
What it means/What to do
You tried to turn the security reception
Soft key which is assigned to set the security
reception to
o r
, but security reception set-
O N
OFF
ting has not set to on.
To turn on or off the security reception using a Soft
key, first set the security reception setting to on.
(See pages 3.49 3.50.)
You tried to make a copy in the following condi-
t i o n s :
Paper size selection is set to Auto .
The bypass tray has the paper other than Letter,
Legal, Half-letter.
Paper cassette(s) runs out of paper.
Press
to select your desired paper.
PA P E R SIZE
You tried to enter a sub-address identical to one
already being used in another F-Code box. Enter a
d i fferent sub-address.
Your machine is almost out of toner.
Please contact your authorized Muratec dealer
soon to purchase a new toner cartridge if you
don t already have one.
Your toner cartridge is empty.
Replace the toner cartridge. Your machine cannot
print until it is replaced with a new toner cartridge.
You attempted to enter too many numbers or other
characters in the current operation.
Press
to delete the extra characters, then
CANCEL
try again. You may wish to review the operation s
appropriate instructions.
You tried to enter too many numbers for a broad-
c a s t . You can enter up to 200 autodialer number
and up to 30 numbers entered through the
numeric keypad.
Press
to delete the extra numbers and
CANCEL
then try again.
using a
O N
Advertisement
Chapters
Table of Contents
