Muratec MFX-1300/1700 Operating Instructions Manual page 98

13 Press . The asks if you want to turn the Fax & Copy feature on or off f o r
ENTER LCD
this programmable one-touch number.
Fax & Copy :---
/ /Enter
14 Press until the mode you want appears.
15 Press .
ENTER
16 Press to return your machine to standby mode.
STO P
Programming printouts
To program a programmable one-touch key to print a list:
1 Press Program key, , 3 , 0 , 1 ,
A
ble one-touch number available:
Select Program No.
P2:No Number Stored
Note: I f P2 appears on the
LCD
b e r f o r P1. You can see what you programmed into P1 by pressing
you want. For example, if you set P1 for printing a list of the machine set-
tings, you will see:
Select Program No.
P1:Machine Settings
Press to go back to the programmable one-touch key you want to
enter.
Note: To erase a programmable one-touch key, see page 3.48.
2 Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for printing a list and you want
to keep this key programmed for printing a list, use these instructions to
make changes. But if you want to assign this key to a completely different
operation (for a delayed transmission, for example), then you first must
erase the stored command before programming the new one.
3 If you want to select a different programmable one-touch key than the one that
appears on the , press that key now.
LCD
4 Press .The asks which operation you want to program into the pro-
ENTER LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
5 Press u n t i l L i s t P r i n t appears.
Type :List Print
/ /Enter
Advanced features
.The shows the first empty programma-
ENTER LCD
, it means that you have already entered a num-
, i f
3.45