Copy Protection - Muratec MFX-1300/1700 Operating Instructions Manual

Basic operation
Ultra Copy resolution
( This mode is available only on the MFX-1700.)
Ultra copy offers the highest copy quality available. However, this feature also requires
more memory than the normal copy resolution. If you try to copy many pages at a time,
memory overflow may occur.
Note: The enlargement/reduction copy feature is not available with this feature.
Therefore, if you are using this feature with the Combine mode, pa r t o f o r i g i n a l
image might be not copied.
Note: This feature allows you to copying with more high quality resolution.
1 Make sure the machine is in the Copy mode.
2 Place your original document in
3 Enter the document size by pressing
4 Press
A D VA N C E D FUNCTIONS
Ultra Copy
/ /Enter
5 Press o r until the setting you want appears.
In this example, we ve chosen On.
Ultra Copy
/ /Enter
6 Press to save the setting. The machine return to the standby mode with fol-
ENTER
lowing display:
Copy <Ultra Copy>
Ltr Auto
7 As needed, set the following:
Document type and Image contrast
Number of copies
8 Press .
STA R T
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press
2.18
face up, or on the glass face down.
ADF FBS
.
D O C U M E N T SIZE
three times, . The shows the current setting:
ENTER LCD
:Off
:On
1
100%
C O P Y RESET
.
STO P

Copy protection

W ith such a versatile copier built right into your fax machine, you might want to make
sure it doesn t become too tempting to unauthorized copying that could deplete your
machine s supplies more rapidly. So, to limit the use of your fax machine to only sending
and receiving faxes in other words, to activate copy protection:
1 Press Program key,
Copy Protect
2 Press
In this example, we ve chosen On.
Copy Protect
3 Press
Copy Protect
**
Whenever someone tries to change the machine to Copy mode, the machine will sound
a brief alarm tone and display:
Fax Ready
Copy Off
To turn copy protection to use the machine s copying function, repeat steps 1-3, in step
2, you press
Copy Protect
.
, 3 , 0 , 5 , .
B ENTER
:Off
/ /Enter
o r until the setting you want appears.
:On
/ /Enter
to save the setting.
ENTER
Complete **
so that the display shows:
:Off
/ /Enter