Table of Contents
Advertisement
What you see on the
LCD
Macro In Use
Memory Overflow
St art Or Cancel
Mirror Carriage Error
Mirror Locked
No Command
No Department Code
No Document Stored
No Drum
No Number Stored
What it means/What to do
You tried to change the function for a Soft key, b u t
that Soft key has been programmed in a Macro
key. You cannot change the Soft key function until
erase the Macro key that contains the Soft key you
want to change. Erase the Macro key, t h e n t r y
again.
During transmission (or copying), you tried to
enter more pages into memory than your fax could
s t o r e . Press
to tell your fax to keep as many
STA RT
pages in memory as possible, or press
delete from memory all pages stored during this
operation (but not previous operations).
The mirror carriage of your machine has become
inoperable. Call your authorized Muratec dealer or
Muratec Customer Support.
The transport mode is not turned off .
Turn off the transport mode (see page 1.8).
You pressed
to review upcoming
REVIEW C O M M A N D S
commands, but your fax machine had none
stored.
You tried to turn on the department code setting
but there are no department codes stored in your
fax machine. Store at least one department code,
then try again.
. . . o r . . .
You entered incorrect department code at fax
sending while the department feature is on. Enter
correct department code.
You tried to print a document from memory, b u t
your fax machine had none stored.
The drum cartridge is missing or has not been
properly installed in your fax machine.
Please properly install the drum cartridge.
You selected an autodialer, batch box or F-Code
box number for which there is no fax (or phone)
number programmed. Either choose another num-
ber or dial a phone number directly from the
numeric keypad.
What you see on the
No Passcode
No PIN Number
No Report
t o
CANCEL
No Toner Cartridge
Not Allowed in Macro
Other Key Setting
Open Top Cover
Please Remove Paper
Open 1st Side Cover
Please Remove Paper
Open 2nd Side Cover
Please Remove Paper
Open Top/2-Bin Cover
Please Remove Paper
Remove Bypass Paper
Open&Close Top Cover
Open&Close ScanCover
Reset Document
Please Call Service
What it means/What to do
LCD
You tried to program a security feature (see page
3.49), but there s no protection passcode stored in
your fax machine. Store a protection passcode in
your machine, then retry again.
You selected Mode1 in the
tried to call an autodialer number in which no PIN
has been entered, or to call using numeric keypad
without
. Enter a
PIN
PIN
You requested an activity journal or confirmation
report, but your fax machine has no record of any
fax jobs having occurred.
The toner cartridge is missing or has not been
properly installed in your fax machine. Please
properly install the toner cartridge.
During macro registration, you pressed the key
which cannot be registered in Macro, such as
Monitor/Call key or Security Reception key.
You tried to enter the same function which is
already stored in other Soft key.
Store the different function.
The paper is jammed in your fax machine.
Open the cover indicated on the LCD, and
remove the jammed paper carefully.
Either your document wasn t inserted correctly,
or the fax to which you re sending can t handle the
document s page
length.
again.
The printer unit of your fax machine has become
inoperable. Call your authorized Muratec dealer or
Muratec Customer Support.
Just in case
mask feature and
PIN
, then try again.
Reset the page and try
5.7
Advertisement
Chapters
Table of Contents
