Muratec MFX-1300/1700 Operating Instructions Manual page 71

Advanced features
6 Press the keys exactly as you operate the job you want to program into the
Macro key.
Note: You can program up to 60 steps. When it comes over 60 steps, your fax
machine asks if you register the operations you have entered. If you want
to register them, press
Note: If you want to cancel the operations you have set, press
,
M A C R O P R O G R A M STO P
Example 1: To program some operations for copy: Press
copy mode, and set number of the copies, paper size, contrast, resolution, reduc-
tion/enlargement rate and sort setting as you want.
Note: See Making copies (pages 2.12 2.18) for detail operations.
Example 2: To program the operations for printing the one-touch numbers list:
Press Program key, , 1 , 0 , 6 ,
E
7 If you programmed
ENTER
Otherwise, press
M A C R O P R O G R A M
8 If you want to start immediately after pressing the Macro key when you use it,
press . I f n o t , p r e s s
ENTER CANCEL
Note: If you want to confirm the settings or operations in the Macro key before
you sta r t i t , p r e s s
Include Start/Enter?
Check Enter/Cancel
9 The now shows:
LCD
M2:Name
_
The machine now asks you to name this job.
I f y o u do not want to enter or change this job s name, skip to step 11 .
10 Enter the name by using the one-touch keys. (If necessary, review Entering
characters , page 1.12) A j o b s name may be up to 130 characters in length.
11 Press to save the setting.
ENTER
3.18
.If not, press .
ENTER STO P
and then go back to step 1.
/
C O P Y FA X
.
ENTER
o r into the operation, proceed to step 8.
STA R T
and skip to step 9.
.
here.
CANCEL
;Upper M2: Name ;Upper
o r
Delayed_
Copying with the Macro key
To copy using a Macro key:
1 Insert the document.
2 Press the Macro key in which you ve stored the copy command.
3 Press
STA R T
to change the
P r i n t i n g l i s ts using the Macro key
To print a list using a Macro key:
1 Press the Macro key in which is programmed for the printing lists .
2 Press
ENTER
Storing fax documents with the Macro key
To store a fax document for either polling or F-Code polling using a Macro key:
1 Insert the document.
2 Press the Macro key which is programmed for the storing operation you want to
use.
3 Press
ENTER
Fax dialing with the Macro key
To dial a fax call using a Macro key:
1 Insert the document.
2 Press the Macro key in which you ve stored the fax communication command.
3 Press
STA R T
Your fax will perform the operation now, or at whatever time you programmed.
If you programmed this key to delay its operation, the
** Reserved **
Jun 01 2002
If you programmed this key to perform the operation immediately after you press it, the
shows the number:
LCD
9-1-972-555-4335
A4
, if you have not registered in the Macro key.
STA RT
, if you have not registered in the Macro key.
ENTER
, if you have not registered in the Macro key.
ENTER
, if you have not registered in the Macro key.
STA RT
LCD
17:17
Normal
shows: