Using The Bypass Tray - Muratec MFX-1300/1700 Operating Instructions Manual

Basic operation
5 As needed, set the following:
Select document type and adjust image contrast
Enter the number of copies
6 Press .
STA R T
Note: To reset the copy parameter to default setting, press
Note: To stop the copying, press

Using the bypass tray

When you need to use a size of paper not currently loaded in your machine s paper cas-
sette(s), or when you want to use a special type of paper (such as transparency film),
use the bypass tray.
Important: If loading transparency (OHP) film into the bypass tray, be sure that the
sheet is designed for laser printers and not for copiers. Also, be sure that
the film does not have a paper backing and/or a leading strip. If it does,
remove the paper backing and/or strip before inserting. Only film should
go in, not film with any backing or strip.
1 Either insert the document in the
2
Set the paper in the bypass tray.
See the table of Acceptable paper size and cassette capacity on page 1.8 and
Loading paper in bypass tray on page 1.10 for more information.
Note: Place the original document in the same orientation as the paper in the
paper source.
3 The machine will select the bypass tray for the paper
source and the will show the default paper size you
LCD
have set in step 6 on page 1.10.
If you want to change it, proceed to step 4.
Otherwise, skip to step 10.
Copy Ready
[ Ltr ] Ltr
4 Press to change the paper size. The
B Y PA S S
Set Bypass Ppr:Ltr
/ /Enter
2.14
.
C O P Y RESET
.
STO P
or place it on the glass.
A D F FBS
1
100%
will show:
LCD
5 If your recording paper on the bypass tray is Letter, Legal or Half-letter, proceed
to step 6. Otherwise, skip to the step 7.
Note: When you use transparency film, skip to step 8 and select OHP in step
9 .
6 Press o r until your desired recording paper size appears. Here, we ve cho-
sen Legal:
Set Bypass Ppr:Legl
/ /Enter
Skip to step 9.
7 Press o r u n t i l Other appears.
Set Bypass Ppr:Other
/ / /Enter
Then press o r . You will see:
ENTER
Set Bypass Ppr:Exe
/ / /Enter
8 Press o r until your desired recording paper size appears. Here, we ve cho-
sen Postcard:
Set Bypass Ppr:Post
/ / /Enter
9 Press .
ENTER
10 If necessary, select desired resolution, contrast, reduction/enlargement ratio.
11
Press to begin the copying process.
STA R T