Muratec MFX-1300/1700 Operating Instructions Manual page 91

Advanced features
5 Press u n t i l Communication appears.
Type :Communication
/ /Enter
6 Press .The now shows either:
ENTER LCD
P2:Fax#/Advan.Func.
_
7 Use the numeric keypad to enter up to 230 fax numbers
bination of call groups, one-touch keys, speed-dial numbers and manually-dialed
numbers.
Important: D o not press
Press to enter a comma between each number or call group.
BROADCAST
Important: Do not insert a comma aft e r t h e last number.
To enter a speed-dial number, press
d i g i t i d e n t i f i e r.
To enter a call group, press
P2:Fax#/Advan.Func.
G5,G7,[01],S006,9-55
Your display can show only 20 characters at a time. To view characters beyond
those 20, press t o s c r o l l t o t h e l e ft o r
8 If you want the broadcast to begin immediately every time you press the key,
press and skip to step 11 .
ENTER
If you want to delay the broadcast, press
9 Next, tell your fax to carry out this delayed command one of these ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, Do this at 5:05
To select this option, use the numeric keypad to enter the date and
time when the fax should perform the command:
Delayed
Enter Time: 30/17:05
3.38
P2:Fax#/Advan.Func.
o r
9-5558743_
you can use any com-
.
ENTER
/ and the number s three-
SPEED DIAL TEL INDEX
and the group s identifier number.
G R O U P DIAL
t o s c r o l l t o t h e r i g h t .
,
A D VA N C E D FUNCTIONS ENTER
on the 30th. )
P M
Option 2:
10 Press
ENTER
11 The asks if you want to make additional settings for this programmable one-
LCD
touch number.
Option
I f y o u do not want to make additional settings, press
I f y o u do want to make additional settings, press
12 The asks which resolution you want to use for this programmable one-touch
LCD
number.
Resolution
13 Press until the mode you want appears.
Note: For any of the following settings, choose ----- if you do not want to spec-
ify the displayed setting for this programmable one-touch key.
14 Press
ENTER
one-touch number.
.
Contrast
15 Press until the mode you want appears.
16 Press
ENTER
for this programmable one-touch number.
Report
17 Press until the mode you want appears.
Perform the command at a certain time each day you press the
key.(For example, Do this at 5:05
To select this option, use the numeric keypad to enter 0 , 0 and then
the time the fax should perform the command:
Delayed
Enter Time: 00/17:05
, .
ENTER
:Off
/ /Enter
:------
/ /Enter
. The asks you to select a contrast mode for each programmable
LCD
:-------
/ /Enter
. The asks you for the type of confirmation report you want to set
LCD
:---
/ /Enter
today. )
P M
.Then skip to step 23.
ENTER
and .
ENTER