Table of Contents
Advertisement
Advanced features
3
Press
. The
shows:
ENTER
LCD
03:F-Code Document
Enter I.D. Code:****
Note: If the F-Code security box is not storing any documents, the machine
briefly displays the following before returning to step 2:
03:Select F-Code Box
No Document Stored
4
Use the numeric keypad to enter your F-Code box s f o u r - d i g i t
Here we ve entered 2345:
03:F-Code Document
Enter I.D. Code:2345
5
Press
.
ENTER
If you ve entered the correct
in the F-Code security box and then erases them.
If you ve entered an incorrect
and returns to standby mode.
Using a relay box
Once your fax machine receives a document via
Code relay boxes, it sends it to the other fax machines that you ve set up on your relay
box. (See Creating or Modifying an F-Code box , pages 3.25 3.29.)
If you set the Auto print mode to on when you created the relay box, your machine will
p r i n t the received document, then relay it to the other machine. Otherwise, your
machine will only relay it to the other machines, not print it. See If you chose Relay,
pages 3.28 3.29 for more details on this setting.
Also, you can send (relay broadcast initiation) the document to another hub machine s
F-Code box and get that machine to relay it to others. See F-Code transmission on
pages 3.33 3.34 for more deta i l .
The hub performs a relay broadcast, and the machine which sends the original docu-
ment to the hub has performed a relay broadcast initiation.
3.32
.
. code.
I
D
.
. code, your fax machine prints all documents
I
D
.
. code, your fax machine aborts the operation
I
D
-
sub-addressing to one of its F-
ITU
T
Erasing an empty F-Code box
An F-Code box must be empty in order to erase it. (If you select an F-Code box in these
steps which is not empty, the machine beeps. If this happens, print all documents i n t h a t
box before erasing it.)
To erase an empty F-Code box:
1
Press Program key,
, 4 , 0 , 2 ,
C
Select F-Code Box
01:No Number Stored
2
Use the numeric keypad to enter the two-digit identifier number (01-50) of the F-
Code box you want to erase. Here, we ve entered 0, 3 and see:
Select F-Code Box
03:Muratec America
3
If you want to erase a different F-Code box than the one that appears on the
enter the box number now.
4
Press
. If the F-Code box is empty, t h e
ENTER
03:Erase F-Code Box
Enter I.D. Code:****
Important:
If you select an F-Code box which is not empty, the machine beeps
and, before returning to step 3, briefly displays:
Select F-Code Box
Box In Use
Print any documents received in the F-Code box, then repeat this
procedure from the beginning to erase the box.
Otherwise, select another F-Code box.
5
Use the numeric keypad to enter the four-digit
Here, we ve entered 2345:
03:Erase F-Code Box
Enter I.D. Code:2345
.The
shows:
ENTER
LCD
Select F-Code Box
o r
01:Murata Machinery
shows:
LCD
.
. code.
I
D
,
LCD
Advertisement
Chapters
Table of Contents
