Muratec MFX-1300/1700 Operating Instructions Manual page 92

Plain-paper digital fax/copier/printer
Table of Contents

Advertisement

18
Press
. The
asks if you want to send a cover page for this programma-
ENTER
LCD
ble one-touch number.
Cover Page
:---
/ /Enter
19
Press
until the mode you want appears.
20
Press
. The
asks if you want to turn the Fax & Copy feature on or off f o r
ENTER
LCD
this programmable one-touch number.
Fax & Copy
:---
/ /Enter
21
Press
until the mode you want appears.
22
Press
.
ENTER
23
Press
to return your machine to standby mode.
STO P
Programming regular polling
To program a regular polling operation into a programmable one-touch key:
1
Press Program key,
, 3 , 0 , 1 ,
A
ble one-touch number available:
Select Program No.
P2:No Number Stored
Note: I f P2 appears on the
LCD
b e r f o r P1. You can see what you programmed into P1 by pressing
you want. For example, if you set P1 for storing of the polling document,
you will see:
Select Program No.
P1:Polling Document
Press
to go back to the programmable one-touch key you want to
enter.
2
Press the key that you want to program or change. Here, we ve selected P2.
Select Program No.
P2:No Number Stored
Note: If your previous command for this key was for a polling transmission and
you want to keep this key programmed for a polling transmission, use
these instructions to make changes. But if you want to assign this key to
a completely different operation (for a delayed transmission, for exam-
ple), then you first must erase the stored command before programming
the new one.
Note: To erase a programmable one-touch key, see page 3.48.
3
If you want to select a different programmable one-touch key than the one that
appears on the
, press that key now.
LCD
4
Press
.The
asks which operation you want to program into the pro-
ENTER
LCD
grammable one-touch:
Type :Communication
/ /Enter
Note: If changing a previously stored command, skip to step 7.
5
Press
u n t i l Communication appears.
Type :Communication
/ /Enter
Advanced features
.The
shows the first empty programma-
ENTER
LCD
, it means that you have already entered a num-
, i f
3.39

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfx-1300Mfx-1700

Table of Contents