Limiting Polling Access To Your Fax Machine - Muratec MFX-1300/1700 Operating Instructions Manual

Limiting polling access to your fax machine

When you set the passcode, a calling fax which doesn t present the proper passcode
cannot poll from your fax.
Important: The passcode you use for polling operation i s not the same as the protec-
t i o n passcode (see page 3.49).
Note: If you re using the Block Junk Fax feature (see pages 3.53 3.54), even incom-
ing calls which meet the passcode test must come from phone numbers you ve
approved.
To set your fax machine s passcode:
1 Decide on the four-digit passcode (0001 9999) you want to use. W rite it down,
and put it in a safe place.
2 Press Program key, , 2 , 1 , 3 ,
B
Passcode
Passcode :0000
3 Use the numeric keypad to enter the desired four-digit passcode.
Passcode
Passcode :5627
4 Press to save the setting.
ENTER
Note: To turn off the limiting polling, change the passcode to 0000 by repeating steps
1 4 and entering 0000 in step 3.
.The shows the current code:
ENTER LCD
Advanced features
3.15