Explanation Of Manual Contents - Mitsubishi Stealth 1994 Import Service Manual

4
INTRODUCTION AND MASTER TROUBLESHOOTING - "0~ to "se this Manual

EXPLANATION OF MANUAL CONTENTS

Maintenance and Servicing Procedures
near the front of each section in order to give the
reader a better understanding of the installed
condition of component parts,
the sequence for maintenance and servicing
procedures; the symbol m indicates a non- . ,ns$$&on steps:
reusable part; the tightening torque is provided
where applicable.
Classifications of Major Maintenance/Service Points
When there are major points relative to maintenance and
servicing procedures (such as essential maintenance and
information regarding the use of special tools, etc.), these are
arranged together as major maintenance and service points and
explained in detail.
l
*:lndicates that there are essential points for removal or
disassembly.
l
a: Indicates that there are essential points for Installation or
reassembly.
Symbols for Lubrication, Sealants and Adhesives
Information concerning the locations for lubrication
and for application of sealants and adhesives is
provided, by using symbols, in the diagram of compo-
nent parts or on the page following the component
parts page, and explained.
Indicates procedures to be per-
Removal steps:
l
The part designation number corresponds to the
number in the illustration to indicate removal
steps.
The part designation number corresponds to the
number in the illustration to indicate disassembly
Specified in case installation is impossible in
reverse order of removal steps.
Omitted if installation is possible in reverse order
of removal steps.
Reassembly steps:
l
Specified in case reassembly is impossible in
reverse order of disassembly steps. Omitted if
reassembly is possible in reverse order of dis-
assembly steps.
Indicates (by symbols) where lubri-
cation is necessary. In this example,
sealant is applied (where indicated)
to the steering gear box.
conditioner compressor oil