Mitsubishi Stealth 1994 Import Service Manual page 208

5-52
Pad assembly
Shim A
Shim 6
Grease
Grease
BRAKES - Service Adiustment Procedures
3. Using a screwdriver, remove the pads and shims.
Using the following method, measure the drag force of the disc
brake after installation of the brake assembly.
4. With the brake assembly removed, use a spring scale to
measure the rotary sliding resistance of the hub in the
forward direction.
5. Clean the piston and then using the special tool, push the
piston into the cylinder (caliper).
6. Apply repair kit grease to both sides of the inner shims.
Specified grease: MOPAR Multi-Purpose Grease
Shim B
Caution
1. Make sure that the friction surfaces of pads and
Shim A
2. The grease should never squeeze out from around
brake discs are free of grease and other contami- 'd
nants.
the shim.