Mitsubishi Stealth 1994 Import Service Manual page 41

LUBRICATION AND MAINTENANCE
LUBRICANT CAPACITIES TABLE
Description
Engine oil
Crankcase
Oil filter
Oil cooler (Turbo)
Total
<Non-Turbo>
<Turbo>
Cooling system (including heater and coola
reserve system)
Manual transaxle
Transfer <5M/T>
Automatic transaxle
Rear axle <AWD>
Power steering
Fuel tank
cold weather areas where the lowest atmos-
pheric temperature is below -23°C (-10°F).
Recommended Lubricants and
Metric measure
4.0 dm"
0.3 dm3
0.3 dm"
4.3 dm3
4.6 dm"
8.0 dm3
2.3 dm3
2.4 dm"
0.27 dm3
0.30 dm"
7.5 dm"
1.1 dm3
0.9 dm"
1.45 dm3
75 dm3
SELECTION OF LUBRICANTS
ENGINE OIL
Engine oil should be used which conform to the requirements
of the API classification "For Service SG ECII" or "For Service
expected temperature range.
Caution
Nondetergent or straight mineral oil must never be used.
Energy Conserving Oil
In order to improve fuel economy and conserve energy new,
lower friction engine oils have been developed. These oils are
readily available and can be identified by such labels as "Energy
Conserving II", "Energy Saving", "Improved Fuel Economy",
etc.
U.S. measure
4.2 qts.
112 qt.
4.5 qts.
4.9 qts.
8.5 qts.
2.4 qts.
2.5 qts.
qt.
qt.
qts.
7.9
qt.
qts.
1.59
gals.
19.8