Mitsubishi Stealth 1994 Import Service Manual page 205

BRAKES
4 1
2
3
When new
When worn
BLEEDING
Caution
Use the specified brake fluid. Don't use a mixture of the
specified brake fluid and another non-specified fluid.
Specified brake fluid: MOPAR Brake Fluid/
BLEEDING THE MASTER CYLINDER
If the master cylinder is empty of brake fluid, bleed the cylinder
as follows.
(2) Depress and hold the brake pedal.
(3) Let your fellow worker plug the master cylinder outlet with
finger.
(4) Keeping the condition (3). release the brake pedal.
(5) Repeat steps (2) to (4) three to four times while filling the
master cylinder with brake fluid.
BLEEDING THE BRAKE PIPE LINE
Start the engine and bleed the air in the sequence shown in the
figure.
Caution
For vehicles with ABS, be sure to filter/strain the brake
fluid being added to the master cylinder reservoir tank.
Debris may damage the HU.
FRONT DISC BRAKE PAD CHECK AND REPLACE-
MENT
NOTE
The brake pads have wear indicators that contact the brake disc
when the brake pad thickness becomes 2 mm (.079 in.). The
wear indicators emit a squealing sound to warn the driver to
have the pads replaced and to have the brake system checked.
Conforming to DOT3 or DOT4
5-49