Explanation Of Manual Contents - Mitsubishi LANCER EVOLUTION-VII Workshop Manual

Hide thumbs Also See for LANCER EVOLUTION-VII:
Table of Contents

Advertisement

00-4

EXPLANATION OF MANUAL CONTENTS

Maintenance and Servicing Procedures
The numbers provided within the diagram indi-
cate the sequence for maintenance and servic-
ing procedures.
D Removal steps:
The part designation number corresponds
to the number in the illustration to indicate
removal steps.
D Disassembly steps:
The part designation number corresponds
to the number in the illustration to indicate
disassembly steps.
Classifications of Major Maintenance/Service Points
When there are major points relative to maintenance and servicing procedures
(such as essential maintenance and service points, maintenance and service stan-
dard values, information regarding the use of special tools, etc.), these are ar-
ranged together as major maintenance and service points and explained in detail.
: Indicates that there are essential points for removal or disassembly.
AA"
: Indicates that there are essential points for installation or reassembly.
"AA
Symbols for Lubrication, Sealants and Adhesives
Information concerning the locations for lubrica-
tion and for application of sealants and adhe-
sives is provided, by using symbols, in the dia-
gram of component parts or on the page follow-
ing the component parts page, and explained.
GENERAL -
How to Use This Manual
D Installation steps:
D Reassembly steps:
Indicates procedures to be performed
before the work in that section is started,
and procedures to be performed after
the work in that section is finished.
Component Diagram
A diagram of the component parts is
provided near the front of each section
in order to give a reader a better under-
standing of the installed condition of
component parts.
Indicates (by symbols) where lubrica-
tion is necessary.
Specified in case installation is impossible
in reverse order of removal steps. Omitted
if installation is possible in reverse order of
removal steps.
Specified in case reassembly is impossible
in reverse order of disassembly steps.
Omitted if reassembly is possible in reverse
order of disassembly steps.
: Grease
(multipurpose grease unless there is
a brand or type specified)
: Sealant or adhesive
: Brake fluid or automatic transmission fluid
: Engine oil, gear oil or air conditioner
compressor oil
: Adhesive tape or butyl rubber tape

Advertisement

Table of Contents
loading

Table of Contents