Mitsubishi Stealth 1994 Import Service Manual page 197

BRAKES
E-4 When diagnostic trouble code "22 STOP LAMP SW" is displayed
[Explanation]
The ABS ECU outputs this diagnostic trouble code
in the following cases.
Stop light switch may remain on for more than
l
15 minutes without ABS operation.
The harness wire for the stop light switch may
be open.
FUSIBLE LINK@
STOP
LIGHT
SWITCH
3
5
Is the voltage between No. 1
terminal and ground equal to the
battery positive voltage when
measured with resistor connector
disconnected?
Is resistor resistance 780 to
860 cl?
RESISTOR
Is there continuity between No. 2
Malfunction of ABS-ECU
[Hint]
If the stop light operates normal, the harness for the
stop light switch input circuit is broken or there is a
No
Yes
Yes
Repair harness.
Repair harness.
Replace resistor.
I
1
I