Mitsubishi Stealth 1994 Import Service Manual page 88

DISASSEMBLY AND REASSEMBLY
8
MB991 237
FRONT SUSPENSION
6
SERVICE POINT OF DISASSEMBLY
2. REMOVAL OF SELF-LOCKING NUT
loosen the self-locking nut.
Caution
The self-locking nut should be loosened only, not
renioved.
(2) Using the special tools, compress the coil spring, and
then remove the self-locking nut.
Caution
1. Install the special
2. Do not use an air tool to tighten the
78Nm
56 ftlbs.
Grease: MOPAR Multi-mileage
Caution
When applying the grease, take care
that grease does not adhere to the
insulator's rubber part.
Disassembly steps
1. Dust shield
l
+ 2. Self-locking nut
3. Strut insulator assembly
5. Upper spring pad
6. Bump rubber
7. Dust shield
8. Front coil spring
9. Strut assembly
tools
maximum length will be attained within the
installation range.
special tool and to remove the self-locking nut.
Lubricant Part No. 2525035
or equivalent
evenly, and so that the
bolt of the