Mitsubishi Stealth 1994 Import Service Manual page 223

No continuity Continuity
4mm
a
b
support bracket
Brake pedal
BRAKES - Brake Pedal
INSPECTION
Check the bushing for wear.
l
Check the brake pedal for bend or twisting.
l
Check the brake pedal return spring for damage.
l
STOP LIGHT SWITCH
(2) The stop light switch is in good condition if there is no
continuity when the plunger is pushed in to a depth of
within 4 mm (.I 6 in.) from the outer case edge surface, and
if there is continuity when it is released.
For vehicles with the cruise control system, the check for
continuity should be made at connectors "a" and "b" of the
stop light switch.
SERVICE POINTS OF INSTALLATION
3. INSTALLATION OF RETURN SPRING
Install the return spring with the shorter hook on the brake
pedal.