Table of Contents
Advertisement
Shortening the Master Making
Time [Quick Master Making]
You can shorten the time required for master making.
BWhen master making is performed with
[Quick Master Making] turned on, an
image is printed at 600 dpi × 400 dpi.
BYou can change the default setting in
[Quick Master Making]
[Admin.].
BYou cannot use this function with the fol-
lowing functions.
C[Rec. Preview]
(A
70)
C[Size]
(A
73)
C[Layout]
C[Multi-Up Print]
C[2 Up]
(A
80)
C[Book Shadow]
C[Binding Margin Adj.]
(A
83)
C[Preview]
C[Editor]
C[Paper Memory Print]
(A
89)
C[Storage]
C[USB Job List]
(A
91)
C[Overlay]
(A
92)
C[Stamp]
BWhen [Quick Master Making] is set, [Auto
90°Rotation]
(A
not be used.
1
Touch [Quick Master Making] in
the [Functions] tab screen.
When [Quick Master Making] is turned on, the
icon in the message area is changed.
[Quick Master Mak-
ing]
OFF
ON
(A
139) under
(A
69)
(A
75)
(A
57)
(A
82)
(A
87)
(A
89)
141) under [Admin.] can-
Icon
Chapter 3 Functions for Master Making
Printing an Original in Dual-Color
[Separation] (Dual-Color Mode)
This function is dedicated for dual-color mode.
By specifying colors and areas in an original, you
can assign the original to the two print drums (cylin-
ders) (separation) in order to perform dual-color
printing.
Print drum (cylinder) 1
Original
Print drum (cylinder) 2
BBy using [Rec. Preview]
compare the results of three separation
types on the preview screen and deter-
mine how you assign colors.
59
Print result
3
(A
69), you can
Advertisement
Table of Contents
Troubleshooting
