Resetting Nvram; Postscript Nvram Resets - Xerox Phaser 7700 Service Manual

Resetting NVRAM

Resetting NVRAM returns all the image processor's NVRAM-stored parameters
to their factory defaults except the print counts and the Adobe firmware serial
number. You can reset both the PostScript and engine NVRAM the PostScript
Menu or the Service Diagnostics Menu.

PostScript NVRAM Resets

Restore factory settings (color)
You can reset settings for density and color balance to the factory-default values.
1.
From the Main Menu, highlight Support and press OK.
2. Highlight Improve Print-Quality? and press OK.
3. Highlight Calibrate Colors Menu and press OK.
4. Highlight Restore Factory Settings? and press OK.
5. Highlight Restore Factory Settings NOW and press the OK to reset the color
settings to factory defaults.
Restore previous settings (color)
You can return the color settings to the ones that existed before you saved the last
color balance adjustments.
1. From the Main Menu, highlight Support and press OK.
2.
Highlight Improve Print-Quality? and press OK.
3. Highlight Calibrate Colors Menu and press OK.
4. Highlight Restore Factory Settings? and press OK.
5.
Highlight Restore Previous Settings and press OK to restore the previous
color settings.
Service Quick Reference Guide
- Resetting NVRAM 6-131