Resetting Nvram; Restore Factory Registration Settings; Restore Factory Color Settings; Restore Previous Color Settings - Xerox Phaser 6300 Service Manual

Resetting NVRAM

Printer configuration settings are maintained in the Engine Control Board, the Image
Processor Board, and the Configuration Card.

Restore Factory Registration Settings

To reset settings for color registration to the factory-default values:
1. On the Control Panel, select Troubleshooting, and then press the OK button.
2. Select Print Quality Problems
3. Select Color
4. Restore Factory
Select
color settings to factory defaults.

Restore Factory Color Settings

To reset settings for density and color balance to the factory-default values:
1. On the Control Panel, select Troubleshooting, and then press the OK button.
2. Print Quality Problems
Select
3. Calibrate Colors
Select
4. Select Restore Factory
5. Select Restore Factory Settings
the color settings to factory defaults.

Restore Previous Color Settings

To restore the color settings to the ones that existed before you saved the last color
balance adjustments.
1. On the Control Panel, select Troubleshooting, and then press the OK button.
2. Select Print Quality Problems
3. Select Calibrate Colors
4. Select Restore Previous
5. Restore Previous Settings
Select
reset the color settings to the previously set values.
6-4
Registration, and then press the OK button.
Settings, and then press the OK button to reset the
menu, and then press the OK button.
Settings, and then press the OK button.
menu, and then press the OK button.
Settings, and then press the OK button.
Phaser 6300/6350 Color Laser Printer Service Manual
menu, and then press the OK button.
menu, and then press the OK button.
NOW, and then press the OK button to reset
menu, and then press the OK button.
NOW, and then press the OK button to