Resetting Nvram - Xerox Phaser 840 Service Manual

Resetting NVRAM

Resetting NVRAM returns all the printers's PostScript NVRAM-stored parameters,
including those of the network card, to their factory defaults, except the print count (for
images processed through the image processor), the Adobe firmware serial number, the
usage profile and the authorization codes. Print engine NVRAM values are not changed
by the following procedure. See SB419 for the Phaser 840.
Resetting NVRAM returns all the image processor's NVRAM-stored parameters, except
the print counts, the Adobe firmware serial number, and the network address, to their
factory defaults.
To reset the printer to its factory-default values, follow this procedure:
Phaser 840/850:
If possible, print the Configuration Page for a record of all the printer's port settings
1.
and other customer-unique settings.
Enter the Troubleshooting menu.
2.
Press and hold the Left arrow button.
3.
While holding the Left arrow button, press Select to enter the hidden service menu.
4.
Scroll to the menu item
5.
Press to reset NVRAM.
6.
OK
Phaser 860:
The Phaser 860 has multiple methods of resetting the printer to factory defaults.
Reset Network Setup
all parameters within that menu to factory defaults.
Reset Printer Setup
parameters within that menu to factory defaults.
Reset Job Defaults
parameters within that menu to factory defaults.
- This option is available in the Service Tools Menu and resets all
Reset NVRAM
customer editable printer parameters to factory defaults.
Clear PS NVRAM
and clears all PostScript NVRAM settings.
Clear PE NVRAM
and clears all Print Engine NVRAM settings.
Set PE NVRAM to Defaults
function menu and sets all Print Engine NVRAM settings to factory default.
4 - 156 Phaser 840/850/860/8200 Color Printer - Service Manual
Reset NVRAM
- This option is available in the Nework Setup Menu and resets
- This option is available in the Printer Setup Menu and resets all
- This option is available in the Job Defaults Menu and resets all
- This option is available in the Service Diagnostics function menu
- This option is available in the Service Diagnostics function menu
- This option is available in the Service Diagnostics
.