Replacing A Lens - Christie CP2000-SB Setup Manual

4.4

Replacing a Lens

A variety of primary lenses can accommodate different throw distances and specific types of installations. See
Section 8: Specifications from the CP2000-SB User Manual (020-100162-xx). To replace or change a lens:
1. Release the lens locking lever (UP position).
2. Pull out lens and replace with a different primary lens as described in
3. Secure with lens locking lever (down position).
4. Calibrate the lens. See
CP2000-SB Setup Guide
020-100249-02 Rev. 1 (05-2009)
Figure 4-3 Replacing the Air Filter
Section 3.8 Basic Image Alignment
Section 4: Maintenance
Section 3.2.2 Install
for details.
Lens(es).
4-7