Honda 2004 Odyssey Service Manual page 340

PCM Inputs and Outputs at Connector D (17P) (With ABS/TCS) '01 Model
NOTE: Standard battery voltage is 12 V.
Terminal Wire color
number
3 PNK/BLK FPTDR (FRAME TO
POWERTRAIN TORQUE
DOWN REQUEST)
5 LT GRN/RED PFINH (POWERTRAIN TO
FRAME INHIBITION)
9 WHT/RED VREF (REFERENCE
VOLTAGE)
11 LT GRN ATSFTP (A/T GEAR
POSITION SWITCH
OUTPUT SIGNAL)
16 RED/BLK TPSOUT (THROTTLE
POSITION SENSOR
OUTPUT SIGNAL)
: With ABS/TCS
Wire side of female terminals
Terminal name
Detects engine retard
request signal
Sends TCS operation
permission signal
Provides reference voltage
to ABS/TCS control unit
Sends transmission range
switch signal
Sends TP sensor signal
Description
With TCS operating: about 5 V
With TCS not operating: about 2.5 V
Permission (normal): about 2.5 V
Inhibition (engine coolant temperature below 32°F
(0°C): about 5 V
Failure (TCS and/or PCM is failure): 0 V
With ignition switch ON (II): about 5 V
With ignition switch OFF: 0 V
With engine running in P position: about 4 V
With throttle fully open: about 4.8 V
With throttle fully closed: about 0.5 V
Signal
(cont'd)
11-31